ORDER NO. 120546
| Order number | 120546 |
| Item designation | CES-I-AS2A-M-C04-SC-120546 |
| Gross weight | 0,071kg |
| Customs tariff number | 85365019 |
Safety switch CES-.-AS-C04 with AS-i connection, plug connector M8
- Very compact design with 3 active faces
- Integrated diagnostic LEDs
- Category 4 / PL e according to EN ISO 13849-1
- Plug connector M8, 3-pin
- Multicode
Installation position
Permissible installation position
Multicode evaluation
Every suitable actuator is detected by the switch.
AS-Interface inputs
| D0, D1, D2, D3 | Door monitoring |
Evaluation is performed via a safety monitor.
LED function display
- The STATE LED indicates the state of the switch.
- The DIA LED indicates whether a fault has been detected in the switch.
- The dual LED on the M8 plug connector indicates the state of the ASi bus.
Work area
| Repeat accuracy R | |
| according to EN 60947-5-2 | <=10 |
Electrical connection ratings
| ASI data in | |
| according to AS-i Safety at Work | D2 |
| according to AS-i Safety at Work | D1 |
| according to AS-i Safety at Work | D3 |
| according to AS-i Safety at Work | D0 |
| ASI slave type | |
| according to ASI specification 3.0 | ID code: B |
| according to ASI specification 3.0 | AE code: 0 |
| ASI operating current | max. 50 mA |
| ASI voltage | 19 … 31.6 V |
| Rated insulation voltage Ui | 300 V |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Turn-on time | |
| Safety outputs | max. 300 ms |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Safety class | III |
| Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
| Dimensions | 42 x 25 x 18 |
| Connection | M8 plug connector, 3-pin |
| Degree of protection | IP67 |
| Material | |
| Rubber support | NBR 80 ±5 Shore |
| Housing | Plastic, PBT |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Tightening torque | |
| Plug connector | max. 0.3 Nm |
| Fixing screws | max. 0.8 Nm |
| Mounting distance | |
| between 2 switches or 2 actuators | min. 80 mm |
| Shock and vibration resistance | according to EN IEC 60947-5-3 |
| Ambient temperature | -25 … +65 °C |
Reliability values acc. to EN ISO 13849-1
| Mission time | 20 y |
| Monitoring of the guard position | |
| Category | 4 |
| Performance Level | PL e |
| PFHD | 4.5 x 10-9 |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures |
In combination with actuator CES-A-BBN-161502
| Assured operating distances sao | |
| Installation position A + B | 15 mm |
| Installation position C + D | 10 mm |
| Assured release distance sar | |
| in x-/z direction / installation position C + D | max. 63 mm |
| in y direction / installation position A + B | max. 77 mm |
| in x/z direction / installation position A + B | max. 69 mm |
| in y direction / installation position C + D | max. 72 mm |
| Operating distance | |
| Installation position A + B | 30 mm |
| Installation position C + D | 25 mm |
| Switching hysteresis | min. 1 mm |
In combination with actuator CES-A-BDN-06-104730, CES-A-BBN-C04-115271
| Assured release distance sar | |
| in y direction | max. 60 mm |
| in x/z direction | max. 40 mm |
| Switching hysteresis | 1 … 2 mm |
In combination with actuator CES-A-BBN-C04-115271
| Assured operating distances sao | |
| Approach direction C or D (broad side) | 6 mm |
| Approach direction A or B (front side) | 10 mm |
| Operating distance | |
| Approach direction C or D (broad side) | 11 mm |
| Approach direction A or B (front side) | 15 mm |
In combination with actuator CES-A-BDN-06-104730
| Assured operating distances sao | |
| Approach direction C or D (broad side) | min. 10 mm |
| Approach direction A or B (front side) | min. 14 mm |
| Operating distance | |
| Approach direction C or D (broad side) | 15 mm |
| Approach direction A or B (front side) | 19 mm |
