EUCHNER CES-AP-C01-CH-SB-111708

ORDER NO. 111708

Order number	111708
Item designation	CES-AP-C01-CH-SB-111708
Gross weight	0,194kg
Customs tariff number	85365019

Non-contact safety switch CES-AP-C01-…

Safety switch with integrated evaluation electronics
No series connection
Short circuit monitoring
2 safety outputs (semiconductor outputs)
Category 4 / PL e according to EN ISO 13849-1
M12 plug connector 5-pin; pin 5 not used
Multicode

Approach direction

Can be adjusted in 90° steps

Short circuit monitoring

The switch generates its own clock signal on the output lines OA/OB.

Pay attention to this aspect when connecting to control systems and relays.

Multicode evaluation

Every suitable actuator is detected by the switch.

Category according to EN 13849-1

Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

Category 4/PL e according to EN 13849-1

Important: To achieve the stated category in accordance with EN ISO 13849-1, both safety outputs (OA and OB) must be evaluated.

LED indicator

STATE	Status LED
DIA	Diagnostics LED

Additional connections

DIA	Diagnostics output (semiconductor)
RST	Reset input

Typical actuating ranges

With actuators CES-A-BBA and CES-A-BCA

For a side approach direction for the actuator and safety switch, a minimum distance of s = 4 mm must be maintained so that the actuating range of the side lobes is not entered.

With actuator CES-A-BPA

For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the actuating range of the side lobes is not entered.