EUCHNER ZSM4204-102966

ORDER NO. 102966

Order number	102966
Item designation	ZSM4204-102966
Gross weight	1,131kg
Customs tariff number	85371098

ZSM, pushbuttons, LED, vibration motor, stop command device

3-stage function
Stop command device
Vibration signal
LED indicator
Pushbuttons
Straight connecting cable, 5 m

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Stop command device

Dual-channel emergency stop device (red, with pull-to-reset and turn-to-reset button) on the switch housing, for different wiring concepts.

Upper position for rapid access in an emergency

Vibration signal

The vibration signal is used for tactile feedback of the enabling position.

LED indicator

The LED indicator is used for visual feedback directly at the enabling switch.

Pushbuttons

Additional functions can be run directly at the enabling switch using the pushbuttons.

Cable

The high-quality connecting cables are available in a straight version.

Controls and indicators

Color	Number	Version
yellow	1	LED
	1	Emergency stop device
	1	Vibration motor
white	1	Pushbutton

Electrical connection ratings

Connecting cable	23×0.14 mm²
rated conditional short-circuit current	100 A
Rated insulation voltage U_i	250 V
Rated impulse withstand voltage U_imp	1.5 kV
Short circuit protection according to IEC 60269-1	2A gG
Utilization category
DC-13	24V 1A
DC-13	24V 0.01A
DC-13	24V 0.3A
Switching characteristics	3-stage enabling switch
Degree of contamination (external, according to EN 60947-1)	3

Mechanical values and environment

Number of changeover contacts	3
Connection	flying lead
Degree of protection	IP54
Material	PA, CR, TPE
Mechanical life	1 x 10⁶
Switching principle	Snap-action contact element
Cable length
straight	5 m
Ambient temperature	-5 … +60 °C