IFM IFM PN7094

ifm distributor in India

IFM PN7094

IFM

We are IFM Product supplier in India

PN-010-RER14-QFRKG/US/ /V – Pressure sensor with display

  • Two switching outputs, one of them with IO-Link communication interface
  • Red/green display for clear identification of the acceptable range
  • The process connection can be rotated for optimum alignment
  • With long-term stability thanks to high overload protection
  • Robust design for use in harsh industrial environments
Product characteristics
Number of inputs and outputsNumber of digital outputs: 2
Measuring range-1…10 bar-14.5…145 psi-0.1…1 MPa
Process connectionthreaded connection G 1/4 internal thread
Application
Special featureGold-plated contacts
Measuring elementceramic-capacitive pressure measuring cell
Applicationfor industrial applications
Medialiquids and gases
Medium temperature [°C]-25…80
Min. bursting pressure150 bar2175 psi15 MPa
Pressure rating75 bar1087 psi7.5 Mpa
Vacuum resistance [mbar]-1000
Type of pressurerelative pressure; vacuum
Electrical data
Operating voltage [V]18…30 DC; (to SELV/PELV)
Current consumption [mA]< 35
Min. insulation resistance [MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]< 0.3
Integrated watchdogyes
Inputs / outputs
Number of inputs and outputsNumber of digital outputs: 2
Outputs
Total number of outputs2
Output signalswitching signal; IO-Link; (configurable)
Electrical designPNP/NPN
Number of digital outputs2
Output functionnormally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]2.5
Permanent current rating of switching output DC [mA]150; (200 (…60 °C) 250 (…40 °C))
Switching frequency DC [Hz]< 170
Short-circuit protectionyes
Type of short-circuit protectionpulsed
Overload protectionyes
Measuring/setting range
Measuring range-1…10 bar-14.5…145 psi-0.1…1 MPa
Factory setting / CMPT = 2
Set point SP-0.9…10 bar-13.5…145 psi-0.09…1 MPa
Reset point rP-0.95…9.95 bar-14…144.5 psi-0.095…0.995 MPa
Min. difference between SP and rP0.05 bar1 psi0.005 MPa
In steps of0.05 bar0.5 psi0.005 MPa
Status_B High Resolution / CMPT = 3
Set point SP-0.92…10 bar-13.3…145 psi-0.092…1 MPa
Reset point rP-0.97…9.95 bar-14…144.3 psi-0.097…0.995 MPa
Min. difference between SP and rP0.05 bar0.8 psi0.005 MPa
In steps of0.01 bar0.1 psi0.001 MPa
Accuracy / deviations
Switch point accuracy [% of the span]< ± 0,5
Repeatability [% of the span]< ± 0,1; (with temperature fluctuations < 10 K)
Characteristics deviation [% of the span]< ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis deviation [% of the span]< ± 0,25
Long-term stability [% of the span]< ± 0,05; (per 6 months)
Temperature coefficient zero point [% of the span / 10 K]< ± 0,2; (0…80 °C)
Temperature coefficient span [% of the span / 10 K]< ± 0,2; (0…80 °C)
Response times
Response time [ms]< 3
Delay time programmable dS, dr [s]0…50
Software / programming
Parameter setting optionshysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit
Interfaces
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
SIO modeyes
Required master port typeA; (when pin 2 not connected: B)
Supported DeviceIDsType of operationDeviceIDFactory setting / CMPT = 2403Status_B High Resolution / CMPT = 3601PN7004311
NoteFor further information please see the IODD PDF file under “Downloads”
Factory setting / CMPT = 2
ProfilesSmart Sensor: Process Data Variable; Device Identification, Device Diagnosis
Min. process cycle time [ms]2.3
IO-Link resolution pressure [bar]0.01
IO-Link resolution pressure [MPa]0.001
IO-Link process data (cyclical)functionbit lengthpressure14binary switching information2
IO-Link functions (acyclical)application specific tag
Status_B High Resolution / CMPT = 3
ProfilesSmart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000)
Min. process cycle time [ms]3
IO-Link resolution pressure [bar]0.005
IO-Link resolution pressure [MPa]0.0005
IO-Link process data (cyclical)functionbit lengthpressure16device status4binary switching information2
IO-Link functions (acyclical)application specific tag
Operating conditions
Ambient temperature [°C]-25…80
Storage temperature [°C]-40…100
ProtectionIP 65; IP 67
Tests / approvals
EMCDIN EN 61000-6-2DIN EN 61000-6-3
Shock resistanceDIN EN 60068-2-2750 g (11 ms)
Vibration resistanceDIN EN 60068-2-620 g (10…2000 Hz)
MTTF [years]260
UL approvalUL Approval no.J001
Pressure Equipment DirectiveSound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Mechanical data
Weight [g]241.7
Materialsstainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC
Materials (wetted parts)stainless steel (1.4404 / 316L); ceramics; FKM
Min. pressure cycles100 million
Tightening torque [Nm]25…35; (recommended tightening torque; depends on lubrication, seal and pressure rating)
Process connectionthreaded connection G 1/4 internal thread
Displays / operating elements
DisplayDisplay unit3 x LED, green (bar, psi, MPa)switching status2 x LED, yellowmeasured valuesalphanumeric display, red/green 4-digit
Remarks
Pack quantity1 pcs.
Electrical connection
ConnectionConnector: 1 x M12; coding: A; Contacts: gold-plated
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PN7094-02 — 02.08.2019 
Still not sure what you want?

We are here to help you, send us your details we will assist you to choose right product.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Know the part number Search here

IFM PN7094

Fill up the form and we will get back to you in few hours with right details. fill the form to help you better way.