Product ID: 772130
Pilz PNOZ m ES ETH
Pilz 772130 is Configurable safe small controllers PNOZmulti 2, communication module, 2 Ethernet / Modbus TCP interfaces.
Electrical data
| Purpose of UINT1 | Versorgung des Moduls |
| Source of internal voltage | über Basisgerät |
| Voltage type of UINT1 | DC |
| Tolerance of UINT. Module | -2 %/+2 % |
Ethernet interface
| Ethernet IP address | 169.254.60.1 |
| Connector type ETHERNET int. | RJ45 |
| Ethernet transmission rate | 10 MBit/s 100 MBit/s |
CANopen interface
| Number of Ethernet interfaces | 2 |
Fieldbus interface
| Fieldbus interface | Modbus/TCP |
| Fieldbus device type | Slave |
| Connection fieldbus | RJ45 |
| Galv. isolation fieldbus | ja |
Environmental data
| Ambient temperature standard | EN 60068-2-14 |
| Ambient temperature | 0 – 60 °C |
| Storage temperature standard | EN 60068-2-1/-2 |
| Climatic suitability standard | EN 60068-2-30 EN 60068-2-78 |
| Condensation permitted? | Not permitted |
| Perm. operating height ASL | 2000 m |
| EMC to standard … | EN 61131-2 |
| Vibration to standard … | EN 60068-2-6 |
| Acc. shock to standard1 | 15g |
| Clearance & creepage dist. to | EN 61131-2 |
| Overvoltage category | II |
| Pollution degree clear.&creep. | 2 |
| Protection type standard | EN 60529 |
| Protection type, mounting | IP54 |
| Protection type, housing | P_SCHUTZ_GEHAEU_IP20 |
| Terminal protection type | IP20 |
Potential separation
| Potential isolation 1 between | Fieldbus and module |
| Type of potential isolation 1 | Funktionsisolierung |
Mechanical data
| Mounting position | waager. auf Hutschiene |
| DIN-rail dimensions | 35 x 7.5 EN 50022 |
| Housing material lower section | PC |
| Housing material front plate | PC |
| Housing material upper part | PC |
| Height dimension | 101.4 mm |
| Width dimension | 22.5 mm |
| Depth dimension | 111 mm |
| Net weight | 80 g |
| Gross weight | 90 g |