Part Number – 101120758
- Snap action with constant contact pressure up to switching point
- 1 Cable entry M 20 x 1.5
- Metal enclosure
- Wide range of alternative actuators
- Good resistance to oil and petroleum spirit
- 40,5 mm x 76 mm x 38 mm
- Actuator heads can be repositioned by 4 x 90°
- Design to EN 50041
Ordering data
| EAN (European Article Number) | 4030661172712 |
| eCl@ss number, Version 9.0 | 27-27-26-01 |
| eCl@ss number, Version 11.0 | 27-27-26-01 |
| ETIM number, version 6.0 | EC000030 |
| ETIM number, version 7.0 | EC000030 |
Approval – Standards
| Certificates | cULusCCCEAC |
General data
| Housing construction form | Norm construction design |
| Actuator type to DIN EN 50041 | A |
| Enclosure material | Light alloy die-casting |
| Enclosure coating material | painted |
| Material of the contacts, electrical | Silver |
| Lever material | Metal film |
| Roller material | Plastic |
| Gross weight | 265 g |
General data – Features
| Safety functions | Yes |
| Number of auxiliary contacts | 1 |
| Number of safety contacts | 1 |
Safety appraisal
| Standards | BG-GS-ET-15EN ISO 13849-1EN 60947-5-1 |
| Mission Time | 20 Year(s) |
Safety appraisal – Safety outputs
| B10d Normally-closed contact (NC) | 20,000,000 Operations |
Mechanical data
| Actuating element | Roller lever |
| Mechanical life, minimum | 30,000,000 Operations |
| Actuating speed, maximum | 2.5 m/s |
| Note (Actuating speed) | Actuating speed with actuating angle 30° to switch axis |
| Note Bounce duration | Bounce duration in accordance with actuating speed |
| Actuating torque, minimum | 0.3 Nm |
Mechanical data – Connection technique
| Terminal Connector | Screw connection |
| Cable section, minimum | 0.75 mm² |
| Cable section, maximum | 2.5 mm² |
| Note (Cable section) | All indications about the cable section are including the conductor ferrules. |
Mechanical data – Dimensions
| Length of sensor | 60.6 mm |
| Width of sensor | 40.5 mm |
| Height of sensor | 134 mm |
Ambient conditions
| Degree of protection | IP65 to EN 60529IP67 to EN 60529 |
| Ambient temperature, minimum | -30 °C |
| Ambient temperature, maximum | +80 °C |
Ambient conditions – Insulation value
| Rated insulation voltage Ui | 250 V |
| Rated impulse withstand voltage Uimp | 6 kV |
Electrical data
| Thermal test current | 10 A |
| Required rated short-circuit current to EN 60947-5-1 | 1,000 A |
| Utilisation category AC-15 | 230 VAC |
| Utilisation category AC-15 | 4 A |
| Utilisation category DC-13 | 24 VDC |
| Utilisation category DC-13 | 4 A |
| Switching element | NO contact, NC contact |
| Switching principle | Snap switch element |
| Switching frequency | 5,000 /h |
| Switchover time, maximum | 2 ms |
