Article No. 8317140500
Product Description | inductive sensor analogue |
Name | KJ14-M30MN80-ANU-F1 |
Order number | 08317140500 |
Matchcode | 9914-0500 |
Switching distance | from 7 mm to 14 mm |
Mounting | non shielded |
Switch type | analog |
Signal Type | Analog Voltage |
Connection | Cable |
Connection diagramm | |
Dimension (in mm) | fine-pitch thread M30 x 80 |
Technical Specification | |
Special features | Output Voltage 1 .. 9 Volt opposite mounting possible with type 08317140600 (F2) |
Operating voltage | 18 – 30 VDC |
Max. ripple | ≤ 5 % |
No load current | ≤ 10 mA |
Switching frequency | 30 Hz |
Operating temperature | -25 ° C to 70 ° C |
Temperature drift | +/- 8 % |
Repeat accuracy | ≤ 1 % |
Linearity | ≤ 3 % |
Analog output | Pulso_has-1 |
Time delay | 300 ms |
Resolution | 1,143 V / mm |
Reverse voltage protection | yes |
Protection category | IP67 |
EMC-level | DIN EN 60947-5-7:2004-06 |
Housing material | Brass, nickel plated |
Material active face | PCB |
Rated operating current at 40° C | 5 mA |
Rated operating voltage | |
Cable length | 2 m |
Utilisation category | DC 13 |
Cable material | PVC LIYCY grau (grey |
Nominal operating voltage | 24 V DC |
Cable cross | 3×0.14 mm² |
internal load resistor | <= 500 Ohm |
FIT / MTTF acc. to SIEMENS 29500 | 174,61 / 654y |