Euchner EUCHNER ZSE2-4C1801

ORDER NO. 091098

Order number	091098
Item designation	ZSE2-4C1801
Gross weight	0,11kg
Customs tariff number	85365019

ZSE, 3-stage

• 3-stage function
• 30.5 mm installation dimension
• With spacer for installation in enabling switch housing G2 or G3

3-stage function

Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).

Switching element

220	2 NO + 2 NC

Electrical connection ratings

rated conditional short-circuit current	100 A
Rated insulation voltage Ui	250 V
Rated impulse withstand voltage Uimp	2.5 kV
Short circuit protection according to IEC 60269-1	4A gG
Switching current
at 24 V	min. 1 mA
Switching voltage
at 10mA	min. 12 V
Utilization category
AC-15	4A 230V
DC-13	3A 24V
Degree of contamination (external, according to EN 60947-1)
Industry	3

Mechanical values and environment

Number of NO contacts	2
Number of positively driven contacts	2
Connection	Tab connector 2.8 x 0.8 IEC 760 + soldered connection
Degree of protection
	IP65
	IP00
Material
Cap	Elastomer, low PAH, black
Housing	Plastic, color black
Mechanical life
Position 1-2-3-1	0.1 x 10⁶
Position 1-2-1	0.1 x 10⁶
Installation orientation	any
Switching principle	Slow-action contact element
Mounting type	IEC 947-5-1 D30
Ambient temperature	-5 … +60 °C

Reliability values acc. to EN ISO 13849-1

	Enabling switch
B10D	0.5 x 10⁶

Miscellaneous

C number
C1801	Fiat
in compliance with	60947-5-8