Article No – PN-010-RER14-MFRKG/US/ /V
Pressure sensor with display
- Two switching outputs, one of them programmable as IO-Link and one as analogue output
- Red/green display for clear identification of the acceptable range
- The process connection can be rotated for optimum alignment
- With long-term stability thanks to high overload protection
- Robust design for use in harsh industrial environments
Product characteristics
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
|---|---|
| Measuring range | -1…10 bar-14.6…145 psi-0.1…1 MPa |
| Process connection | threaded connection G 1/4 internal thread (DIN EN ISO 1179-2) |
Application
| Special feature | Gold-plated contacts |
|---|---|
| Measuring element | ceramic-capacitive pressure measuring cell |
| Application | for industrial applications |
| Media | liquids and gases |
| Medium temperature [°C] | -25…80 |
| Min. bursting pressure | 150 bar2175 psi15 MPa |
| Pressure rating | 75 bar1087 psi7.5 Mpa |
| Vacuum resistance [mbar] | -1000 |
| Type of pressure | relative pressure; vacuum |
Electrical data
| Operating voltage [V] | 18…30 DC; (to SELV/PELV) |
|---|---|
| Current consumption [mA] | < 35 |
| Min. insulation resistance [MΩ] | 100; (500 V DC) |
| Protection class | III |
| Reverse polarity protection | yes |
| Power-on delay time [s] | 0.3 |
| Integrated watchdog | yes |
Inputs / outputs
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 |
|---|
Outputs
| Total number of outputs | 2 |
|---|---|
| Output signal | switching signal; analogue signal; IO-Link; (configurable) |
| Electrical design | PNP/NPN |
| Number of digital outputs | 2 |
| Output function | normally open / normally closed; (parameterisable) |
| Max. voltage drop switching output DC [V] | 2 |
| Permanent current rating of switching output DC [mA] | 250 |
| Switching frequency DC [Hz] | < 500 |
| Number of analogue outputs | 1 |
| Analogue current output [mA] | 4…20; (scalable 1:5) |
| Max. load [Ω] | 500 |
| Analogue voltage output [V] | 0…10; (scalable 1:5) |
| Min. load resistance [Ω] | 2000 |
| Short-circuit protection | yes |
| Type of short-circuit protection | pulsed |
| Overload protection | yes |
Measuring/setting range
| Measuring range | -1…10 bar-14.6…145 psi-0.1…1 MPa |
|---|---|
| Analogue start point | -1…8 bar-14.6…116 psi-0.1…0.8 MPa |
| Analogue end point | 1…10 bar14.6…145 psi0.1…1 MPa |
Factory setting / CMPT = 2
| Set point SP | -0.94…10 bar-13.6…145 psi-0.094…1 MPa |
|---|---|
| Reset point rP | -0.98…9.96 bar-14.2…144.4 psi-0.098…0.996 MPa |
| Min. difference between SP and rP | 0.06 bar0.6 psi0.006 MPa |
| In steps of | 0.02 bar0.2 psi0.002 MPa |
Status_B High Resolution / CMPT = 3
| Set point SP | -0.94…10 bar-13.6…145 psi-0.094…1 MPa |
|---|---|
| Reset point rP | -0.98…9.96 bar-14.2…144.4 psi-0.098…0.996 MPa |
| Min. difference between SP and rP | 0.05 bar0.6 psi0.005 MPa |
| In steps of | 0.01 bar0.1 psi0.001 MPa |
Accuracy / deviations
| Switch point accuracy [% of the span] | < ± 0,4; (Turn down 1:1) |
|---|---|
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) |
| Characteristics deviation [% of the span] | < ± 0,25 (BFSL) / < ± 0,5 (LS); (Turn down 1:1; BFSL = Best Fit Straight Line; LS = limit value setting) |
| Hysteresis deviation [% of the span] | < ± 0,1; (Turn down 1:1) |
| Long-term stability [% of the span] | < ± 0,05; (Turn down 1:1; per 6 months) |
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,2; (-0…80 °C) |
| Temperature coefficient span [% of the span / 10 K] | < ± 0,2; (-0…80 °C) |
| Notes on the accuracy / deviation | switch point accuracy, linearity error under DNV GL: < ± 1%: < ± 1% |
Response times
| Response time [ms] | < 1.5 |
|---|---|
| Delay time programmable dS, dr [s] | 0…50 |
| Damping process value dAP [s] | 0…4 |
| Damping for the analogue output dAA [s] | 0…4 |
| Max. response time analogue output [ms] | 3 |
Software / programming
| Parameter setting options | hysteresis / window; normally open / normally closed; switch-on/switch-off delay; Damping; Display unit; current/voltage output |
|---|
Interfaces
| Communication interface | IO-Link |
|---|---|
| Transmission type | COM2 (38,4 kBaud) |
| IO-Link revision | 1.1 |
| SDCI standard | IEC 61131-9 |
| SIO mode | yes |
| Required master port type | A; (when pin 2 not connected: B) |
| Supported DeviceIDs | Type of operationDeviceIDFactory setting / CMPT = 2463Status_B High Resolution / CMPT = 3974 |
| Note | For further information please see the IODD PDF file under “Downloads” |
Factory setting / CMPT = 2
| Profiles | Smart Sensor: Process Data Variable; Device Identification, Device Diagnosis |
|---|---|
| Min. process cycle time [ms] | 2.3 |
| IO-Link resolution pressure [bar] | 0.01 |
| IO-Link process data (cyclical) | functionbit lengthpressure14binary switching information2 |
| IO-Link functions (acyclical) | application specific tag |
Status_B High Resolution / CMPT = 3
| Profiles | Smart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000) |
|---|---|
| Min. process cycle time [ms] | 3 |
| IO-Link resolution pressure [bar] | 0.005 |
| IO-Link process data (cyclical) | functionbit lengthpressure16device status4binary switching information2 |
| IO-Link functions (acyclical) | application specific tag |
Operating conditions
| Ambient temperature [°C] | -25…80 |
|---|---|
| Storage temperature [°C] | -40…100 |
| Protection | IP 65; IP 67 |
Tests / approvals
| EMC | DIN EN 61000-6-2DIN EN 61000-6-3 |
|---|---|
| Shock resistance | DIN EN 60068-2-2750 g (11 ms) |
| Vibration resistance | DIN EN 60068-2-620 g (10…2000 Hz) |
| MTTF [years] | 138 |
| UL approval | UL Approval no.J012 |
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request |
Mechanical data
| Weight [g] | 239 |
|---|---|
| Materials | stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC |
| Materials (wetted parts) | stainless steel (1.4404 / 316L); Al2O3 (ceramics); FKM |
| Min. pressure cycles | 100 million |
| Tightening torque [Nm] | 25…35; (recommended tightening torque; depends on lubrication, seal and pressure rating) |
| Process connection | threaded connection G 1/4 internal thread (DIN EN ISO 1179-2) |
| Restrictor element integrated | no (can be retrofitted) |
Displays / operating elements
| Display | Display unit3 x LED, green (bar, psi, MPa)switching status2 x LED, yellowmeasured valuesalphanumeric display, red/green 4-digit |
|---|
Remarks
| Pack quantity | 1 pcs. |
|---|
Electrical connection
| Connection | Connector: 1 x M12; coding: A; Contacts: gold-plated |
|---|
