IFM IFM SM8000

ifm distributor in India

IFM SM8000

IFM

IFM SM8000

We are IFM Product supplier in India

Article No. SMR11GGXFRKG/US-100

Magnetic-inductive flow meter

  • Precise measurement of flow, consumption and medium temperature
  • High accuracy, repeatability and measurement dynamics
  • With switching output, analogue output and pulse output
  • Clearly visible 4-digit LED display

Product characteristics

Number of inputs and outputsNumber of digital outputs: 2; Number of analogue outputs: 1
Measuring range0.2…100 l/min0.01…6 m³/h
Process connectionthreaded connection G 1 DN25 flat seal

Application

Special featureGold-plated contacts
Applicationtotaliser function; for industrial applications
Installationconnection to pipe by means of an adapter
Mediaconductive liquids; water; hydrous media
Note on mediaconductivity: ≥ 20 µS/cmviscosity: < 70 mm²/s (40 °C)
Medium temperature [°C]-10…70
Pressure rating [bar]16
Pressure rating [Mpa]1.6
MAWP (for applications according to CRN) [bar]11.2

Electrical data

Operating voltage [V]18…30 DC; (to SELV/PELV)
Current consumption [mA]95; (24 V)
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]5

Inputs / outputs

Number of inputs and outputsNumber of digital outputs: 2; Number of analogue outputs: 1

Inputs

Inputscounter reset

Outputs

Total number of outputs2
Output signalswitching signal; analogue signal; pulse signal; IO-Link; (configurable)
Electrical designPNP/NPN
Number of digital outputs2
Output functionnormally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]2
Permanent current rating of switching output DC [mA]200
Number of analogue outputs1
Analogue current output [mA]4…20; (scalable)
Max. load [Ω]500
Analogue voltage output [V]0…10; (scalable)
Min. load resistance [Ω]2000
Pulse outputflow rate meter
Short-circuit protectionyes
Type of short-circuit protectionpulsed
Overload protectionyes

Measuring/setting range

Measuring range0.2…100 l/min0.01…6 m³/h
Display range-120…120 l/min-7.2…7.2 m³/h
Resolution0.1 l/min0.005 m³/h
Set point SP0.7…100 l/min0.04…6 m³/h
Reset point rP0.2…99.5 l/min0.01…5.97 m³/h
Analogue start point ASP0…80 l/min0…4.8 m³/h
Analogue end point AEP20…100 l/min1.2…6 m³/h
In steps of0.1 l/min0.005 m³/h

Volumetric flow quantity monitoring

Pulse value0.00001…100 000 m³
Pulse length [s]0,0025…2

Temperature monitoring

Measuring range [°C]-20…80
Resolution [°C]0.2
Set point SP [°C]-19.2…80
Reset point rP [°C]-19.6…79.6
Analogue start point [°C]-20…60
Analogue end point [°C]0…80
In steps of [°C]0.2

Accuracy / deviations

Flow monitoring

Accuracy (in the measuring range)± (0,8 % MW + 0,5 % MEW)
Repeatability± 0,2% MEW

Temperature monitoring

Accuracy [K]± 2,5 (Q > 5 l/min)

Response times

Flow monitoring

Response time [s]0.15; (dAP = 0, T19)
Delay time programmable dS, dr [s]0…50
Damping process value dAP [s]0…5

Temperature monitoring

Dynamic response T05 / T09 [s]T09 = 20 (Q > 5 l/min)

Software / programming

Parameter setting optionsFlow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; switching logic; current/voltage/pulse output; start-up delay; display can be deactivated; Display unit

Interfaces

Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesSmart Sensor: Process Data Variable; Device Identification, Device Diagnosis
SIO modeyes
Required master port typeA
Process data analogue3
Process data binary2
Min. process cycle time [ms]5
Supported DeviceIDsType of operationDeviceIDDefault575

Operating conditions

Ambient temperature [°C]-10…60
Storage temperature [°C]-25…80
ProtectionIP 67

Tests / approvals

EMCDIN EN 60947-5-9
CPA approvalmodel number002MIaccuracy class-maximum allowable error± 1,5 % FSQ (min)0,01 m³/hQ (t)-Q (max)6 m³/h
Shock resistanceDIN IEC 68-2-2720 g (11 ms)
Vibration resistanceDIN IEC 68-2-65 g (10…2000 Hz)
MTTF [years]145
Pressure Equipment DirectiveSound engineering practice; can be used for group 2 fluids; group 1 fluids on request

Mechanical data

Weight [g]577
Materialsstainless steel (1.4404 / 316L); PBT-GF20; PC; FKM; TPE
Materials (wetted parts)stainless steel (1.4404 / 316L); PEEK; FKM
Process connectionthreaded connection G 1 DN25 flat seal

Displays / operating elements

DisplayDisplay unit6 x LED, green (l/min, m³/h, l, m³, 10³, °C)switching status2 x LED, yellowmeasured valuesalphanumeric display, 4-digitprogrammingalphanumeric display, 4-digit

Remarks

RemarksMW = measured valueMEW = Final value of the measuring range
Pack quantity1 pcs.

Electrical connection

ConnectionConnector: 1 x M12; coding: A; Contacts: gold-plated
Still not sure what you want?

We are here to help you, send us your details we will assist you to choose right product.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Know the part number Search here
IFM SM8000

IFM SM8000

Fill up the form and we will get back to you in few hours with right details. fill the form to help you better way.