ORDER NO. 111145
| Order number | 111145 |
| Item designation | CES-AP-C01-AH-SB-111145 |
| Gross weight | 0,189kg |
| European Article Number (EAN) | 4047048006737 |
| Customs tariff number | 85365019 |
Approach direction
Can be adjusted in 90° steps
Short circuit monitoring
The switch generates its own clock signal on the output lines OA/OB.
Pay attention to this aspect when connecting to control systems and relays.
Unicode evaluation
Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last actuator taught-in is detected.
Category according to EN 13849-1
Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:
- Category 4/PL e according to EN 13849-1
Important: To achieve the stated category in accordance with EN ISO 13849-1, both safety outputs (OA and OB) must be evaluated.
LED indicator
| STATE | Status LED |
| DIA | Diagnostics LED |
Additional connections
| DIA | Diagnostics output (semiconductor) |
| RST | Reset input |
Typical actuating range
With actuators CES-A-BBA and CES-A-BCA
For a side approach direction for the actuator and safety switch, a minimum distance of s = 4 mm must be maintained so that the actuating range of the side lobes is not entered.
With actuator CES-A-BPA
For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the actuating range of the side lobes is not entered.
Connector assignment
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
| 1 | UB | Power supply, DC 24 V | BN | |
| 2 | OA | Safety output, channel 1 | WH | |
| 3 | 0V | Ground, DC 0 V | BU | |
| 4 | OB | Safety output, channel 2 | BK | |
| 5 | – | n.c. | GY |
