Euchner EUCHNER CES-AP-CL2-CH-SB-106551

ORDER NO. 106551

Order number	106551
Item designation	CES-AP-CL2-CH-SB-106551
Gross weight	0,099kg
Customs tariff number	85365019

Non-contact safety switch CES-AP-CL2-… , M12, PUR

• Safety switch with integrated evaluation electronics
• No series connection
• Short circuit monitoring
• 2 safety outputs (semiconductor outputs)
• Door hinge left
• Category 4 / PL e according to EN ISO 13849-1
• Connecting cable PUR, 0.2 m, plug connector M12, 5-core
• Multicode
• Two safety screws M4x14 included

Short circuit monitoring

The switch generates its own clock signal on the output lines OA/OB.

Pay attention to this aspect when connecting to control systems and relays.

Multicode evaluation

Every suitable actuator is detected by the switch.

Category according to EN 13849-1

Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

• Category 4/PL e according to EN 13849-1

Important: To achieve the stated category in accordance with EN ISO 13849-1, both safety outputs (OA and OB) must be evaluated.

LED indicator

STATE	Status LED
DIA	Diagnostics LED

Additional connection

OUT	Monitoring output (semiconductor)

Approach directions

Typical actuating range

(Actuator CES-A-BLN… in conjunction with safety switch CES-AP-C.2-… in case of mounting on plastic)

For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the actuating range of the side lobes is not entered.

Attention:

The actuating range may vary depending on the substrate material and installation situation.

Work area

Repeat accuracy R
according to EN 60947-5-2	<= 10

Electrical connection ratings

Current consumption	max. 30 mA
Fusing
external (operating voltage)	0.25 … 8 A
Rated insulation voltage Ui	75 V
Rated impulse withstand voltage Uimp	1.5 kV
Operating voltage DC
UB	24 V DC -15% … +15% regulated, residual ripple < 5%
Turn-on time
Safety outputs	max. 300 ms
EMC protection requirements	according to EN IEC 60947-5-3
Utilization category
DC-13	24V 150mA
Risk time according to EN 60947-5-3	max. 260 ms
Safety class	III
Degree of contamination (external, according to EN 60947-1)	3
	Monitoring output OUT
Output type	p-switching, short circuit-proof
Output voltage	0.8 x UB … UB V DC
Switching current	max. 50 mA
	Safety outputs OA / OB
Output type	Semiconductor outputs, p-switching, short circuit-proof
rated conditional short-circuit current	100 A
Discrepancy time	max. 10 ms
Output voltage
HIGH U(OA,OB)	UB-1.5V … UB V DC
LOW U(OA,OB)	0 … 1 V DC
Switching current
per safety output	1 … 150 mA
Off-state current Ir	max. 0.25 mA
Test pulses	max. 0.3 ms
Test pulse interval	min. 100 ms

Mechanical values and environment

Connection	Connecting cable PUR, 0.2 m, with plug connector M12, 5-pin
Degree of protection	IP67
Ready delay	0.5 s
Material
Housing	Plastic, PBT
Dynamic bending radius	10 x cable diameter
Static bending radius	5 x cable diameter
Installation orientation	any
Switching frequency	max. 1 Hz
Tightening torque
Fixing screws	max. 1 Nm
Mounting distance
between 2 switches or 2 actuators	min. 400 mm
Mounting type	Surface mounting on metal
Shock and vibration resistance	according to EN IEC 60947-5-3
Cable ambient temperature (dynamic)	-5 … +65 °C
Cable ambient temperature (static)	-25 … +65 °C

Reliability values acc. to EN ISO 13849-1

Mission time	20 y
	Monitoring of the guard position
Category	4
Performance Level	PL e
PFHD	1.8 x 10-9

Miscellaneous

The following applies to the approval according to UL

Operation only with UL Class 2 power supply or equivalent measures

In combination with actuator CES-A-BLN-R2-100776, CES-A-BLN-U2-103450, CES-A-BLN-L2-104510, CES-A-BLN-U2-112710

Assured operating distances sao	min. 10 mm
Assured release distance sar
in x/z direction	max. 40 mm
in y direction	max. 60 mm
Operating distance	15 mm
Switching hysteresis	1 … 2 mm

In combination with actuator CES-A-BDN-06-104730

Assured operating distances sao	min. 14 mm
Assured release distance sar
in y direction	max. 60 mm
in x/z direction	max. 40 mm
Operating distance	19 mm
Switching hysteresis	1 … 2 mm