ORDER NO. 106552
Order number | 106552 |
Item designation | CES-AP-CR2-AH-SB-106552 |
Gross weight | 0,099kg |
Customs tariff number | 85365019 |
Non-contact safety switch CES-AP-CR2-… , M12, PUR
- Safety switch with integrated evaluation electronics
- No series connection
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Door hinge right
- Category 4 / PL e according to EN ISO 13849-1
- Connecting cable PUR, 0.2 m, plug connector M12, 5-core
- Unicode
- Two safety screws M4x14 included
Short circuit monitoring
The switch generates its own clock signal on the output lines OA/OB.
Pay attention to this aspect when connecting to control systems and relays.
Unicode evaluation
Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last actuator taught-in is detected.
Category according to EN 13849-1
Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:
- Category 4/PL e according to EN 13849-1
Important: To achieve the stated category in accordance with EN ISO 13849-1, both safety outputs (OA and OB) must be evaluated.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
Additional connection
OUT | Monitoring output (semiconductor) |
Approach directions
Typical actuating range
(Actuator CES-A-BLN… in conjunction with safety switch CES-AP-C.2-… in case of mounting on plastic)
For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the actuating range of the side lobes is not entered.
Attention:
The actuating range may vary depending on the substrate material and installation situation.
Work area
Repeat accuracy R | |
according to EN 60947-5-2 | <= 10 |
Electrical connection ratings
Current consumption | max. 30 mA |
Fusing | |
external (operating voltage) | 0.25 … 8 A |
Rated insulation voltage Ui | 75 V |
Rated impulse withstand voltage Uimp | 1.5 kV |
Operating voltage DC | |
UB | 24 V DC -15% … +15% regulated, residual ripple < 5% |
Turn-on time | |
Safety outputs | max. 300 ms |
EMC protection requirements | according to EN IEC 60947-5-3 |
Utilization category | |
DC-13 | 24V 150mA |
Risk time according to EN 60947-5-3 | max. 260 ms |
Safety class | III |
Degree of contamination (external, according to EN 60947-1) | 3 |
Monitoring output OUT | |
Output type | p-switching, short circuit-proof |
Output voltage | 0.8 x UB … UB V DC |
Switching current | max. 50 mA |
Safety outputs OA / OB | |
Output type | Semiconductor outputs, p-switching, short circuit-proof |
rated conditional short-circuit current | 100 A |
Discrepancy time | max. 10 ms |
Output voltage | |
HIGH U(OA,OB) | UB-1.5V … UB V DC |
LOW U(OA,OB) | 0 … 1 V DC |
Switching current | |
per safety output | 1 … 150 mA |
Off-state current Ir | max. 0.25 mA |
Test pulses | max. 0.3 ms |
Test pulse interval | min. 100 ms |
Mechanical values and environment
Connection | Connecting cable PUR, 0.2 m, with plug connector M12, 5-pin |
Degree of protection | IP67 |
Ready delay | 0.5 s |
Material | |
Housing | Plastic, PBT |
Dynamic bending radius | 10 x cable diameter |
Static bending radius | 5 x cable diameter |
Installation orientation | any |
Switching frequency | max. 1 Hz |
Tightening torque | |
Fixing screws | max. 1 Nm |
Mounting distance | |
between 2 switches or 2 actuators | min. 400 mm |
Mounting type | Surface mounting on metal |
Shock and vibration resistance | according to EN IEC 60947-5-3 |
Cable ambient temperature (dynamic) | -5 … +65 °C |
Cable ambient temperature (static) | -25 … +65 °C |
Reliability values acc. to EN ISO 13849-1
Mission time | 20 y |
Monitoring of the guard position | |
Category | 4 |
Performance Level | PL e |
PFHD | 1.8 x 10-9 |
Miscellaneous
The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures |
In combination with actuator CES-A-BLN-R2-100776, CES-A-BLN-U2-103450, CES-A-BLN-L2-104510, CES-A-BLN-U2-112710
Assured operating distances sao | min. 10 mm |
Assured release distance sar | |
in y direction | max. 60 mm |
in x/z direction | max. 40 mm |
Operating distance | 15 mm |
Switching hysteresis | 1 … 2 mm |
In combination with actuator CES-A-BDN-06-104730
Assured operating distances sao | min. 14 mm |
Assured release distance sar | |
in x/z direction | max. 40 mm |
in y direction | max. 60 mm |
Operating distance | 19 mm |
Switching hysteresis | 1 … 2 mm |