Euchner EUCHNER CES-I-AP-U-C04-USB-116502

ORDER NO. 116502

Order number	116502
Item designation	CES-I-AP-U-C04-USB-116502
Gross weight	0,086kg
Customs tariff number	85365019

Non-contact safety switches CES-I-AP-.-C04-…, M12

• Safety switch with integrated evaluation electronics
• No series connection
• Short circuit monitoring
• 2 safety outputs (semiconductor outputs)
• Category 4 / PL e according to EN ISO 13849-1
• Three active faces
• Connecting cable PUR, 0.22 m, plug connector M12, 5-core
• Unicode
• Monitoring output OD

Installation position

Permissible installation position

Unicode evaluation

Each actuator is highly coded (unicode). The switch detects only taught-in actuators. Additional actuators can be taught-in. Only the last actuator taught-in is detected.

Category according to EN 13849-1

Due to two redundantly designed semiconductor outputs (safety outputs) with internal monitoring suitable for:

• Category 4/PL e according to EN 13849-1

Important: To achieve the stated category according to EN ISO 13849-1, both safety outputs (FO1A and FO1B) must be evaluated.

LED indicator

STATE	Status LED
DIA	Diagnostics LED

Connector assignment

Plug connector (view of connection side)	Pin	Designation	Function	Connecting cable conductor coloring
	1	UB	Power supply, DC 24 V	BN
	2	FO1A	Safety output, channel 1	WH
	3	0V	Ground, DC 0 V	BU
	4	FO1B	Safety output, channel 2	BK
	5	OD	Monitoring output	GY

Work area

Repeat accuracy R
according to EN 60947-5-2	<= 10

Electrical connection ratings

Current consumption
no load on outputs	max. 35 mA
Fusing
external (operating voltage)	0.25 … 8 A
Rated insulation voltage Ui	300 V
Rated impulse withstand voltage Uimp	1.5 kV
Operating voltage DC
UB	24 V DC -15% … +15% regulated, residual ripple < 5%, PELV
Turn-on time
Safety outputs	max. 300 ms
EMC protection requirements	according to EN IEC 60947-5-3
Risk time according to EN 60947-5-3	max. 260 ms
Safety class	III
Degree of contamination (external, according to EN 60947-1)	3
	Monitoring output OD
Output type	p-switching, short circuit-proof
Output voltage	0.8 x UB … UB V DC
Switching current	max. 50 mA
	Safety outputs FO1A / FO1B
Output type	Semiconductor outputs, p-switching, short circuit-proof
rated conditional short-circuit current	100 A
Discrepancy time	max. 10 ms
Output voltage
HIGH U(FO1A) / U(FO1B)	UB-1.5V … UB V DC
LOW U(FO1A) / U(FO1B)	0 … 1 V DC
Switching current
per safety output	1 … 150 mA
Utilization category
DC-13	24V 150mA
Off-state current Ir	max. 0.25 mA
Test pulses	max. 0.3 ms
Test pulse interval	min. 100 ms

Mechanical values and environment

Connection	PUR cable, 200 mm, with plug connector M12x1, 5-pin
Degree of protection	IP67
Ready delay	0.5 s
Material
Rubber support	NBR 80 ±5 Shore
Housing	Plastic, PBT
Dynamic bending radius	10 x cable diameter
Static bending radius	5 x cable diameter
Installation orientation	any
Switching frequency	max. 1 Hz
Tightening torque
Fixing screws	max. 0.8 Nm
Mounting distance
between 2 switches or 2 actuators	min. 80 mm
Mounting type	Surface mounting on metal
Shock and vibration resistance	according to EN IEC 60947-5-3
Cable ambient temperature (dynamic)	-25 … +65 °C
Cable ambient temperature (static)	-25 … +65 °C

Reliability values acc. to EN ISO 13849-1

Mission time	20 y
	Monitoring of the guard position
Category	4
Performance Level	PL e
PFHD	4.1 x 10-9

Miscellaneous

Additional feature	Rubber support included
The following applies to the approval according to UL	Operation only with UL Class 2 power supply or equivalent measures

In combination with actuator CES-A-BBN-161502

Assured operating distances sao
in z direction / installation position A + B	min. 15 mm
in x direction/installation position C + D	min. 10 mm
Assured release distance sar
in y direction / installation position C + D	max. 72 mm
in y direction / installation position A + B	max. 77 mm
in x/z direction / installation position C + D	max. 63 mm
in x/z direction / installation position A + B	max. 69 mm
Operating distance
Installation position C + D	25 mm
Installation position A + B	30 mm
Switching hysteresis
in z direction / installation position A + B	1 … 2 mm
in x direction/installation position C + D	1 … 2 mm

In combination with actuator CES-A-BDN-06-104730

Assured operating distances sao
Installation position A or B (front side)	min. 14 mm
Installation position C or D (broad side)	min. 10 mm
Assured release distance sar
in y direction	max. 60 mm
in x/z direction	max. 40 mm
Operating distance
Installation position C or D (broad side)	15 mm
Installation position A or B (front side)	19 mm
Switching hysteresis	1 … 2 mm

In combination with actuator CES-A-BDN-06-161742

Assured operating distances sao
Installation position A	min. 16 mm
Installation position C	min. 10 mm
Assured release distance sar
Installation position A	max. 77 mm
Installation position C	max. 72 mm
Operating distance
Installation position A	26 mm
Installation position C	23 mm
Switching hysteresis	1 … 2 mm

In combination with actuator CES-A-BBN-C04-115271, CES-A-BBN-C04-EX-137527

Assured operating distances sao
Installation position A or B (front side)	min. 10 mm
Installation position C or D (broad side)	min. 6 mm
Assured release distance sar
in y direction	max. 60 mm
in x/z direction	max. 40 mm
Operating distance
Installation position C or D (broad side)	11 mm
Installation position A or B (front side)	15 mm
Switching hysteresis	1 … 2 mm