ORDER NO. 052504
Precision single hole fixing limit switch EGT2
| Order number | 052504 |
| Item designation | EGT2SEM4 |
| Gross weight | 0,115kg |
| European Article Number (EAN) | 4047048001251 |
| Customs tariff number | 85365019 |
- with snap-action switching element
- Plunger material stainless steel
- Any installation orientation
Snap-action switching contact, 1 NC contacts and 1 NO contacts. Single hole fixing limit switches must not be used as an end stop.
Technical Data
Electrical connection ratings
| Rated insulation voltage Ui | 50 V |
| Rated impulse withstand voltage Uimp | 2.5 kV |
| Short circuit protection according to IEC 60269-1 | 2A gG |
| Switching current | |
| min. at 24 V | 10 mA |
| Switching voltage | |
| min. | 12 V |
| Utilization category | |
| AC-15 | 2A 30V |
| DC-13 | 1A 24V |
Mechanical values and environment
| Approach speed | 0.01 … 10 m/min |
| Number NC contacts | 1 |
| Number of NO contacts | 1 |
| Connection | Plug connector M12 |
| Degree of protection | IP67 |
| Design | Thread M18 x 1 |
| Material | |
| Sleeve | Brass, nickel plated |
| Threaded section | Brass, nickel plated |
| Contact | Fine silver, gold plated |
| Actuating element | Ball plunger |
| Actuating force | |
| approx. | 24 N |
| Mechanical life | 1 x 10⁶ |
| Installation orientation | any |
| Switching principle | Snap-action switching contact |
| Ambient temperature | -5 … +60 °C |
| Repeat accuracy (absolute) | ±0.01 mm |
