Euchner EUCHNER TP4-4141A024SEM4AS1

ORDER NO. 088257

Order number	088257
Item designation	TP4-4141A024SEM4AS1
Gross weight	0,47kg
Customs tariff number	85365019

Safety switch TP AS1, plug connector M12 (closed-circuit current principle)

• Auxiliary release on the front
• Increased horizontal overtravel
• Optionally without guard lock monitoring

Guard locking types

TP3	Closed-circuit current principle, guard locking by spring force. Release by control of AS-i output 0.
TP4	Open-circuit current principle, guard locking by control of AS-i output 0. Release by spring force.

Control of the guard locking solenoid

The guard locking solenoid is controlled by the control system via AS-Interface bus bit D0. In addition, the 24V connection can be switched safely.

AS-Interface inputs, version AS1

D0, D1	Door monitoring contact SK
D2, D3	Solenoid monitoring contact ÜK

AS-Interface inputs, version AS1

D0, D1	Door monitoring contact SK 1
D2, D3	Door monitoring contact SK 2

Evaluation is performed via a safety monitor.

AS-Interface outputs

D0	Guard locking solenoid
D1	LED red
D2	LED green

LED function display

• The Power LED indicates the operating voltage on the bus.
• The Fault LED indicates if a fault has been detected on the AS-Interface bus.
• The green and the red LEDs can be controlled as required by the control system via the bus using bits D1 and D2.

Auxiliary release

This is used for releasing the guard locking with the aid of a tool. To protect against tampering, the auxiliary release is sealed with sealing lacquer.

Electrical connection ratings

ASI data in
according to AS-i Safety at Work	D0, D1, D2, D3
ASI data out
LED red	D1
ASI slave type
according to ASI specification 2.1	ID code: B
ASI operating current	max. 45 mA
ASI auxiliary voltage
IEC 60742, PELV	24 V -15% … +10%
ASI auxiliary current	300 mA
ASI voltage	22.5 … 30 … 31.6 V
Solenoid duty cycle	100 %

Mechanical values and environment

Approach speed	max. 20 m/min
Number of door position positively driven contacts
according to AS-i Safety at Work	1
Number of guard lock monitoring positively driven contacts
according to AS-i Safety at Work	1 D2,D3
Extraction force	20 N
Material
Housing	Reinforced thermoplastic
Actuation frequency	max. 1200 1/h
Mechanical life	1 x 10⁶
Installation orientation	any
Switching principle	Slow-action switching contact
Retention force	10 N
Ambient temperature	-20 … +55 °C

In combination with actuator ACTUATOR-P-GT

Horizontal insertion depth	28 mm
Vertical insertion depth	29.5 mm
Horizontal overtravel	2 mm
Vertical overtravel	1.5 mm

In combination with actuator ACTUATOR-P-GNT

Horizontal insertion depth	28 mm
Horizontal overtravel	7 mm