ORDER NO. 103126
| Order number | 103126 |
| Item designation | ZSM2101-103126 |
| Gross weight | 0,938kg |
| Customs tariff number | 85371098 |
ZSM, LED, + and – buttons, vibration motor, stop command device, key-operated rotary switch
- 3-stage function
- Stop command device
- Vibration signal
- LED indicator
- + and – buttons
- Key-operated rotary switch
- Straight connecting cable, 5 m
3-stage function
Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).
Stop command device
Dual-channel emergency stop device (red, with pull-to-reset and turn-to-reset button) on the switch housing, for different wiring concepts.
Lower position, protected by anti-kink strain relief in case of a fall.
Vibration signal
The vibration signal is used for tactile feedback of the enabling position.
LED indicator
The LED indicator is used for visual feedback directly at the enabling switch.
+ and – buttons
These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.
Key-operated rotary switch
For individual use, e.g. as operating mode selector.
Cable
The high-quality connecting cables are available in a straight version.
Controls and indicators
| Item | Extras | Color | Designation1 | Number | LED | Switching element | Slide-in label inscription | Version | Note slide-in label |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Key-operated rotary switch | ||||||||
| yellow | 1 | LED | |||||||
| 1 | Emergency stop device | ||||||||
| 1 | Vibration motor | ||||||||
| 1 | + button | ||||||||
| 1 | – button |
Electrical connection ratings
| Connecting cable | 23×0.14 mm² |
| rated conditional short-circuit current | 100 A |
| Rated insulation voltage Ui | 250 V |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Short circuit protection according to IEC 60269-1 | 2A gG |
| Utilization category | |
| DC-13 | 24V 0.01A |
| DC-13 | 24V 0.3A |
| DC-13 | 24V 1A |
| Switching characteristics | 3-stage enabling switch |
| Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
| Number of changeover contacts | 3 |
| Connection | flying lead |
| Degree of protection | IP54 |
| Material | PA, CR, TPE |
| Mechanical life | 1 x 10⁶ |
| Switching principle | Snap-action contact element |
| Cable length | |
| straight | 5 m |
| Ambient temperature | -5 … +60 °C |
Reliability values acc. to EN ISO 13849-1
| Emergency stop | |
| B10D | 0.1 x 10⁶ |
| Enabling switch | |
| B10D | 0.1 x 10⁶ |
Miscellaneous
| in compliance with | 60947-5-8 |
