Article No. O5DLCPKG/US
Photoelectric distance sensor
- Very long range due to time-of-flight measurement
- Reliable background suppression and colour-independent detection
- With display and pushbuttons for precise switch point setting
- Oblique angle to the object possible
- Reliable detection of glossy surfaces
Product characteristics
Type of light | red light |
---|---|
Laser protection class | 2 |
Housing | rectangular |
Application
Special feature | Background suppression |
---|
Electrical data
Operating voltage [V] | 10…30 DC; (“supply class 2” to cULus) |
---|---|
Current consumption [mA] | 75; (24 V) |
Protection class | III |
Reverse polarity protection | yes |
Type of light | red light |
Wave length [nm] | 650 |
Typ. lifetime [h] | 50000 |
Inputs / outputs
Number of inputs and outputs | Number of digital outputs: 2 |
---|
Outputs
Total number of outputs | 2 |
---|---|
Electrical design | PNP |
Number of digital outputs | 2 |
Output function | normally open / normally closed; (complementary) |
Max. current load per output [mA] | 100 |
Switching frequency DC [Hz] | 11 |
Short-circuit protection | yes |
Type of short-circuit protection | pulsed |
Overload protection | yes |
Detection zone
Max. light spot diameter [mm] | 5 |
---|---|
Light spot dimensions refer to | 2 m |
Detection range hysteresis [%] | < 2.5 |
Note on monitoring range hysteresis | black 6% remission |
Background suppression available | yes |
Background suppression [m] | < 20 |
Measuring/setting range
Measuring range [m] | 0.03…2 |
---|---|
Sampling rate [Hz] | 33 |
Interfaces
Communication interface | IO-Link |
---|---|
Transmission type | COM2 (38,4 kBaud) |
IO-Link revision | 1.1 |
SDCI standard | IEC 61131-9 |
Profiles | Smart Sensor: Sensor Identification; Binary Data Channel; Process Value; Sensor Diagnosis |
SIO mode | yes |
Process data analogue | 1 |
Process data binary | 1 |
Min. process cycle time [ms] | 6.6 |
Supported DeviceIDs | Type of operationDeviceIDDefault372 |
Operating conditions
Ambient temperature [°C] | -25…60 |
---|---|
Note on ambient temperature | at ta < -10 °C warm-up is necessary, laser is off |
Protection | IP 65; IP 67 |
Max. immunity to extraneous light [klx] | 10; (on the object) |
Tests / approvals
EMC | EN 60947-5-2 |
---|---|
Laser protection class | 2 |
Notes on laser protection | Caution:laser lightPower:<= 4,0 mWWave length:650 nmpulse:1,3 nsDo not stare into beam.Avoid exposure to the laser light.laser class:2EN / IEC60825-1:2007EN / IEC60825-1:2014Complies with 21 CFR 1040 except for deviations pursuant to Laser Notice No. 50, dated June 2007. |
MTTF [years] | 151 |
Mechanical data
Weight [g] | 61.6 |
---|---|
Housing | rectangular |
Dimensions [mm] | 56 x 18.2 x 46.8 |
Materials | housing: PA; bezel: stainless steel; operator interface: TPU; lens: PMMA |
Lens alignment | side lens |
Displays / operating elements
Display | switching statusLED, yellow switching output PIN 4operationLED, greendisplayalphanumeric display, 3-digit |
---|---|
Display unit | cm |
Remarks
Pack quantity | 1 pcs. |
---|
Electrical connection
Connection | Connector: 1 x M12; coding: A |
---|