IFM IFM PN7571

ifm distributor in India

IFM PN7571

IFM

IFM PN7571

We are IFM Product supplier in India

PN-250-SEG14-QFRKG/US/ /V – Pressure sensor with display

  • Two switching outputs, one of them with IO-Link communication interface
  • Red/green display for clear identification of the acceptable range
  • The process connection can be rotated for optimum alignment
  • With long-term stability thanks to high overload protection
  • Robust design for use in harsh industrial environments
Product characteristics
Number of inputs and outputsNumber of digital outputs: 2
Measuring range0…250 bar0…3620 psi0…25 MPa
Process connectionthreaded connection G 1/4 external thread internal thread:M5
Application
Special featureGold-plated contacts
Measuring elementmetallic thin film cell
Applicationfor industrial applications
Medialiquids and gases
Medium temperature [°C]-25…80
Min. bursting pressure1100 bar15950 psi110 MPa
Pressure rating500 bar7250 psi50 Mpa
Vacuum resistance [mbar]-1000
Type of pressurerelative pressure
Electrical data
Operating voltage [V]18…30 DC; (to SELV/PELV)
Current consumption [mA]< 35
Min. insulation resistance [MΩ]100; (500 V DC)
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]0.3
Integrated watchdogyes
Inputs / outputs
Number of inputs and outputsNumber of digital outputs: 2
Outputs
Total number of outputs2
Output signalswitching signal; IO-Link; (configurable)
Electrical designPNP/NPN
Number of digital outputs2
Output functionnormally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]2.5
Permanent current rating of switching output DC [mA]150; (200 (…60 °C) 250 (…40 °C))
Switching frequency DC [Hz]< 170
Short-circuit protectionyes
Type of short-circuit protectionpulsed
Overload protectionyes
Measuring/setting range
Measuring range0…250 bar0…3620 psi0…25 MPa
Factory setting / CMPT = 2
Set point SP2…250 bar40…3620 psi0.2…25 MPa
Reset point rP1…249 bar20…3600 psi0.1…24.9 MPa
Min. difference between SP and rP2 bar20 psi0.2 MPa
In steps of1 bar20 psi0.1 MPa
Status_B High Resolution / CMPT = 3
Set point SP2…250 bar30…3626 psi0.2…25 MPa
Reset point rP1…249 bar12…3608 psi0.1…24.9 MPa
Min. difference between SP and rP2 bar19 psi0.2 MPa
In steps of1 bar1 psi0.1 MPa
Accuracy / deviations
Switch point accuracy [% of the span]< ± 0,5
Repeatability [% of the span]< ± 0,1; (with temperature fluctuations < 10 K)
Characteristics deviation [% of the span]< ± 0,25 (BFSL) / < ± 0,5 (LS); (BFSL = Best Fit Straight Line; LS = limit value setting)
Hysteresis deviation [% of the span]< ± 0,25
Long-term stability [% of the span]< ± 0,05; (per 6 months)
Temperature coefficient zero point [% of the span / 10 K]0,2; (-25…80 °C)
Temperature coefficient span [% of the span / 10 K]0,2; (-25…80 °C)
Response times
Response time [ms]< 3
Delay time programmable dS, dr [s]0…50
Software / programming
Parameter setting optionshysteresis / window; normally open / normally closed; switching logic; switch-on/switch-off delay; Damping; Display unit
Interfaces
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
SIO modeyes
Required master port typeA; (when pin 2 not connected: B)
Process data analogue1
Process data binary2
Supported DeviceIDsType of operationDeviceIDFactory setting / CMPT = 2400Status_B High Resolution / CMPT = 3598PN7001308
NoteFor further information please see the IODD PDF file under “Downloads”
Factory setting / CMPT = 2
ProfilesSmart Sensor: Process Data Variable; Device Identification, Device Diagnosis
Min. process cycle time [ms]2.3
IO-Link resolution pressure [bar]1
IO-Link resolution pressure [MPa]0.1
IO-Link process data (cyclical)functionbit lengthpressure14binary switching information2
IO-Link functions (acyclical)application specific tag
Status_B High Resolution / CMPT = 3
ProfilesSmart Sensor ED2: Digital Measuring Sensor (0x000A), Identification and Diagnosis (0x4000)
Min. process cycle time [ms]3
IO-Link resolution pressure [bar]0.1
IO-Link resolution pressure [MPa]0.01
IO-Link process data (cyclical)functionbit lengthpressure16device status4binary switching information2
IO-Link functions (acyclical)application specific tag
Operating conditions
Ambient temperature [°C]-25…80
Storage temperature [°C]-40…100
ProtectionIP 65; IP 67
Tests / approvals
EMCDIN EN 61000-6-2DIN EN 61000-6-3
Shock resistanceDIN EN 60068-2-2750 g (11 ms)
Vibration resistanceDIN EN 60068-2-620 g (10…2000 Hz)
MTTF [years]214
UL approvalUL Approval no.J003
Pressure Equipment DirectiveSound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Mechanical data
Weight [g]258.5
Materials1.4542 (17-4 PH / 630); stainless steel (1.4404 / 316L); PBT+PC-GF30; PBT-GF20; PC
Materials (wetted parts)1.4542 (17-4 PH / 630)
Min. pressure cycles100 million
Tightening torque [Nm]25…35; (recommended tightening torque; depends on lubrication, seal and pressure rating)
Process connectionthreaded connection G 1/4 external thread internal thread:M5
Restrictor element integratedno (can be retrofitted)
Displays / operating elements
DisplayDisplay unit3 x LED, green (bar, psi, MPa)switching status2 x LED, yellowmeasured valuesalphanumeric display, red/green 4-digit
Remarks
Pack quantity1 pcs.
Electrical connection
ConnectionConnector: 1 x M12; coding: A; Contacts: gold-plated
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — PN7571-01 — 27.11.2019
Still not sure what you want?

We are here to help you, send us your details we will assist you to choose right product.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Know the part number Search here
IFM PN7571

IFM PN7571

Fill up the form and we will get back to you in few hours with right details. fill the form to help you better way.