Close this search box.


IFM SD6050


IFM SD6050

We are IFM Product supplier in India

SDR12DGXFPKG/US-100 – Compressed air meter

  • Precise measurement of flow, consumption and medium temperature
  • High accuracy, repeatability and measurement dynamics
  • For detecting compressed air in industrial use
  • With switching output, analogue output and pulse output
  • Clearly visible 4-digit LED display
Product characteristics
Number of inputs and outputsNumber of digital outputs: 2; Number of analogue outputs: 1
Measuring range10…1250 l/min0.3…103.6 m/s0.2…75 m³/h
Process connectionthreaded connection G 1/2 DN15
Applicationfor industrial applications
Mediacompressed air
Medium temperature [°C]0…60
Pressure rating [bar]16
Pressure rating [Mpa]1.6
Electrical data
Operating voltage [V]18…30 DC; (to SELV/PELV)
Current consumption [mA]< 110
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]1
Inputs / outputs
Number of inputs and outputsNumber of digital outputs: 2; Number of analogue outputs: 1
Total number of outputs2
Output signalswitching signal; analogue signal; pulse signal; IO-Link; (configurable)
Electrical designPNP
Number of digital outputs2
Output functionnormally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]2
Permanent current rating of switching output DC [mA]250; (per output)
Number of analogue outputs1
Analogue current output [mA]4…20; (scalable)
Max. load [Ω]500
Pulse outputconsumed quantity meter
Short-circuit protectionyes
Type of short-circuit protectionpulsed
Overload protectionyes
Measuring/setting range
Measuring range10…1250 l/min0.3…103.6 m/s0.2…75 m³/h
Display range0…1500 l/min0…124.3 m/s0…90 m³/h
Set point SP10…1250 l/min0.8…103.6 m/s0.6…75 m³/h
Reset point rP4…1244 l/min0.3…103.1 m/s0.2…74.6 m³/h
Analogue start point ASP0…938 l/min0…77.7 m/s0…56.3 m³/h
Analogue end point AEP312…1250 l/min25.9…103.6 m/s18.7…75 m³/h
In steps of1 l/min0.1 m/s0.1 m³/h
Volumetric flow quantity monitoring
Pulse value0.001…1000000 m³
In steps of0.001 m³
Pulse length [s]0,02…2
Temperature monitoring
Measuring range [°C]0…60
Display range [°C]-12…72
Accuracy / deviations
Flow monitoring
Repeatability [% of the measured value]± 1,5
Accuracy (in the measuring range)± (15 % MW + 1,5 % MEW); (maximum value to be achieved for air quality class 344 (DIN 8573-1); when using pipes of tolerance class T3/T4; inlet and outlet pipe lengths without edges and abrupt diameter changes; inner surface of the pipe free of burrs)
Temperature monitoring
Accuracy [K]± 2; (medium flow in the limit area of the flow measurement range)
Response times
Flow monitoring
Response time [s]0.1; (dAP = 0)
Damping process value dAP in steps [s]0 – 0,2 – 0,4 – 0,6 – 0,8 – 1
Software / programming
Parameter setting optionsFlow monitoring; quantity meter; Preset counter; Temperature monitoring; hysteresis / window; normally open / normally closed; current/pulse output; display can be rotated and switched off; Display unit; totaliser
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9 CDV
Profilesno profile
SIO modeyes
Required master port typeA
Process data analogue3
Process data binary2
Min. process cycle time [ms]4.1
Supported DeviceIDsType of operationDeviceIDDefault262
Operating conditions
Ambient temperature [°C]0…60
Storage temperature [°C]-20…85
Max. relative air humidity [%]90
ProtectionIP 65
Tests / approvals
EMCDIN EN 61000-6-2DIN EN 61000-6-3
CPA approvalmodel number004TGaccuracy class-maximum allowable error± 16,5 % FSQ (min)0,2 m³/hQ (t)-Q (max)75 m³/h
Vibration resistanceDIN EN 68000-2-65 g (55…2000 Hz)
MTTF [years]227
Pressure Equipment DirectiveSound engineering practice; can be used for group 2 fluids; group 1 fluids on request
Mechanical data
Weight [g]579
MaterialsPBT-GF20; NBR; PC; stainless steel (1.4301 / 304); PTFE; brass coated; FKM; aluminium powder-coated
Materials (wetted parts)stainless steel (1.4301 / 304); FKM; ceramics glass passivated; PEEK GF30; polyester; aluminium
Tightening torque [Nm]50
Process connectionthreaded connection G 1/2 DN15
Displays / operating elements
DisplayDisplay unit5 x LED, green (Nl/min, Nm³/h, Nm/s, Nm³, °C)function display1 x LED, greenswitching status2 x LED, yellowmeasured valuesalphanumeric display, 4-digitprogrammingalphanumeric display, 4-digit
RemarksMW = measured valueMEW = Final value of the measuring rangeMeasuring, display and setting ranges refer to the standard volume flow according to DIN ISO 2533.For information about installation and operation please see the operating instructions.
Pack quantity1 pcs.
Electrical connection
ConnectionConnector: 1 x M12; coding: A
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SD6050-01 — 25.06.2013
Still not sure what you want?

We are here to help you, send us your details we will assist you to choose right product.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Know the part number Search here
IFM SD6050

IFM SD6050

Fill up the form and we will get back to you in few hours with right details. fill the form to help you better way.