Close this search box.


IFM SI5002


IFM SI5002

We are IFM Product supplier in India

SID10ADBFPKG/US-100 – Flow monitor

  • Reliable monitoring of liquids and gases in pipes
  • Variable process connection using adapters
  • Easy setting of the switch points for quick set-up
  • Robust stainless steel housing for use in harsh industrial environments
  • LED bar graph for indication of switch point and flow
Product characteristics
Number of inputs and outputsNumber of digital outputs: 2
Process connectionM18 x 1,5 internal thread
MediaLiquids; Gases
Medium temperature [°C]-25…80
Pressure rating [bar]300
Medium temperature [°C]-25…80
Medium temperature [°C]-25…80
Electrical data
Operating voltage [V]18…36 DC
Current consumption [mA]< 60
Protection classIII
Reverse polarity protectionyes
Power-on delay time [s]10
Inputs / outputs
Number of inputs and outputsNumber of digital outputs: 2
Total number of outputs2
Output signalswitching signal; IO-Link; (configurable)
Electrical designPNP
Number of digital outputs2
Output functionnormally open / normally closed; (parameterisable)
Max. voltage drop switching output DC [V]2.5
Permanent current rating of switching output DC [mA]250
Short-circuit protectionyes
Type of short-circuit protectionpulsed
Overload protectionyes
Measuring/setting range
Probe length L [mm]45
Setting range [cm/s]3…300
Greatest sensitivity [cm/s]3…100
Setting range [cm/s]200…3000
Greatest sensitivity [cm/s]200…800
Accuracy / deviations
Repeatability [cm/s]1…5
Note on repeatabilityfor water 5…100 cm/s; 25 °CFactory setting
Temperature drift [cm/s x 1/K]0.1; (for water 5…100 cm/s; 10…70 °C)
Temperature gradient [K/min]300
Switch point accuracy [cm/s]± 2…± 10; (for water 5…100 cm/s; 25 °C; Factory setting)
Hysteresis [cm/s]2…5; (for water 5…100 cm/s; 25 °C; Factory setting)
Response times
Response time [s]1…10
Response time [s]1…10
Response time [s]1…10
Software / programming
Adjustment of the switch pointpushbutton
Communication interfaceIO-Link
Transmission typeCOM2 (38,4 kBaud)
IO-Link revision1.1
SDCI standardIEC 61131-9
ProfilesSmart Sensor: Process Data Variable; Device Identification
SIO modeyes
Required master port typeA
Process data analogue2
Process data binary2
Min. process cycle time [ms]3
Supported DeviceIDsType of operationDeviceIDDefault51
Operating conditions
Ambient temperature [°C]-25…80
Storage temperature [°C]-25…100
ProtectionIP 65; IP 67
Tests / approvals
EMCDIN EN 60947-5-9
Shock resistanceDIN IEC 60068-2-2750 g (11 ms)
Vibration resistanceDIN EN 60068-2-620 g (55…2000 Hz)
MTTF [years]277
Mechanical data
Weight [g]247.5
Dimensions [mm]M18 x 1.5
Thread designationM18 x 1.5
Materialsstainless steel (1.4404 / 316L); stainless steel (1.4310 / 301); PC; PBT-GF20; EPDM/X
Materials (wetted parts)stainless steel (1.4404 / 316L); O-ring: FKM 80 Shore A
Process connectionM18 x 1,5 internal thread
Displays / operating elements
Displayfunction10 x LED, three-colour
Pack quantity1 pcs.
Electrical connection
ConnectionConnector: 1 x M12; coding: A
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — EN-GB — SI5002-03 — 10.04.2015
Still not sure what you want?

We are here to help you, send us your details we will assist you to choose right product.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.
Know the part number Search here
IFM SI5002

IFM SI5002

Fill up the form and we will get back to you in few hours with right details. fill the form to help you better way.