 |  |
| Name | KJ4-M18MB100-ANU-V2 |
| Order number | 08317140965 |
| Matchcode | 9914-0965 |
| Switching distance | from 1 mm to 4 mm |
| Mounting |  shielded |
| Switch type |  analog |
| Signal Type | Analog Voltage |
| Connection | connector M12 |
| Connection diagramm |  |
| Dimension (in mm) | fine-pitch thread M18 x 100 |
| Technical Specification | |
| Special features | Output Voltage 1 … 9 Volt |
| Operating voltage | 18 – 30 VDC |
| Max. ripple | ≤ 10 % |
| No load current | ≤ 10 mA |
| Switching frequency | 100 Hz |
| Operating temperature | -25 ° C to 70 ° C |
| Temperature drift | +/- 8 % |
| Repeat accuracy | ≤ 1 % |
| Linearity | ≤ 3% |
| Analog output | Pulso_has1 |
| Time delay | 300 ms |
| Resolution | 2,67 V / mm |
| Reverse voltage protection | yes |
| Protection category | IP67 |
| EMC-level | DIN EN 60947-5-7:2004-06 |
| Housing material | Brass, nickel plated |
| Material active face | PCB |
| Rated operating current at 40° C | < 10 mA |
| Rated operating voltage | |
| Utilisation category | DC 13 |
| Contact material | CuSn |
| Contact surface material | NiAu |
| Contact holder | PA 6 |
| Nominal operating voltage | 24 V DC |
| Termination | Connector M12 4pin |
| internal Load | <= 500 Ohm |
| FIT / MTTF acc. to SIEMENS 29500 | 112,02 / 1019y |
