Part Number – 101165310
- 2 reed contacts
- Non-contact principle
- Long life
- 104 mm x 52 mm x 47 mm
- Aluminium enlosure
- Actuating distance up to 50 mm depending on actuating magnet and version
- Screw connection
- Highly resistant to vibration
- Available for actuation from front or side
Ordering data
| EAN (European Article Number) | 4030661208909 |
| eCl@ss number, Version 9.0 | 27-27-01-05 |
| eCl@ss number, Version 11.0 | 27-27-01-05 |
| ETIM number, version 6.0 | EC002544 |
| ETIM number, version 7.0 | EC002544 |
General data
| Standards | EN 60947-5-1 |
| Active principle | Magnetic drive |
| Housing construction form | rectangular |
| Enclosure material | Aluminium |
| Active area | Metal film |
| Gross weight | 300 g |
General data – Features
| bias magnet | Yes |
| Number of snap-in contacts | 2 |
Mechanical data
| Actuating panels | lateral |
| Active area | lateral |
| Actuating element | Magnet |
| Mechanical life, minimum | 1,000,000,000 Operations |
| Repeat accuracy R R | 0.3 mm |
| Actuating speed, maximum | 18 m/s |
Mechanical data – Switching distances according IEC 60947-5-3
| Switch distance Sn | 5 mm … 50 mmBP 10S = 5 mm2 x BP 10S = 10 mmBP 20S = 15 mmBP 31S = 15 mmBP 11S = 5 mm2 x BP 11S = 15 mmBP 12S = 10 mmBP 10N = 5 mm2 x BP 10N = 10 mmBP 15N = 7 mmBP 15S = 7 mm2 x BP 15/2N = 15 mm2 x BP 15/2S = 15 mmBP 34N = 10 … 25 mmBP 34S = 10 … 25 mmBP 20N = 15 mmBP 31N = 15 mmBP 11N = 5 mm2 x BP 11N = 15 mmBP 12N = 10 mm2 x BP 12N = 5 … 20 mm2 x BP 12S = 5 … 20 mmBP 21 N = 10 … 35 mmBP 21 S = 10 … 35 mm2 x BP 21N = 15 … 50 mm2 x BP 21S = 15 … 50 mmBE 20N = 10 mmBE 20S = 10 mm |
| Notice (Switch distance Sn) | Actuating distance up to 50 mm depending on version and actuating magnet |
Mechanical data – Connection technique
| Terminal Connector | Screw connection |
Mechanical data – Dimensions
| Length of sensor | 47 mm |
| Width of sensor | 104 mm |
| Height of sensor | 52 mm |
Ambient conditions
| Degree of protection | IP67 |
| Ambient temperature, minimum | -25 °C |
| Ambient temperature, maximum | +90 °C |
| Resistant to vibration | 50 g, on sine wave oscillation |
Electrical data
| Voltage type | AC (alternating current) |
| Switching voltage, maximum | 250 VAC |
| Switching current, maximum | 3 A |
| Switching capacity, maximum | 120 W |
| Switching capacity, maximum | 120 VA |
| Switching element | Bistable contact, NC / NO |
| Bounce duration, minimum | 0.3 ms |
| Bounce duration, maximum | 0.6 ms |
| Switching frequency | 1,080,000 /h |
Electrical data – Digital Output
| Versions | Reed contacts |
Scope of delivery
| Included in delivery | Actuators must be ordered separately. |
Accessory
| Recommendation (actuator) | BP 10 S2x BP 10 SBP 15 SBP 34 SBP 20 SBP 31 SBP 11 S2x BP 11 SBP 12 SBP 21 S2x BP 21 SBE 20 SBP 10 N2x BP 10 NBP 15 N2 x BP 15/2 N2x BP 15/2 SBP 34 NBP 20 NBP 31 NBP 11 N2x BP 11 NBP 12 N2x BP 12 N2x BP 12 SBP 21 N2x BP 21 NBE 20 N |
Notes
| Note (General) | The opening and closing functions depend on the direction of actuation, the actuating magnets and the polarity of the actuating magnets.When the switches and actuators come together, the colours must coincide: Red (S) to red (S) and green (N) to green (N). |
